EQUIPMENT: MACROPAVER®
SLURRY MICROSURFACING MACHINES
|
 The
VSS truck-mounted Macropaver® has gained a worldwide reputation
for flexibility, high production and low-cost performance. The
Macropaver applies all slurry and polymer-modified microsurfacings
with equal ease.
- Consistent quality is accomplished throughout the production with automatic sequencing, a feature pioneered and perfected by VSS.
- Macropaver can easily double the application rates of competitive conventional machines, with average outputs of 2,727 - 3,636 kg/min. (3-4 tons/min).
- Macropaver features the finest quality components and no chain or sprocket drives. Rugged, dependable performance has proven Macropaver's superior reliability, ease of operation, and productivity. Built with the experience that comes from Valley Slurry Seal's 50 years as a pavement maintenance contractor, Macropaver is the clear choice for today...and tomorrow.
|
| SPECIFICATIONS
|
Dimensions
|
| Model |
10B |
12B |
| Total Unit Length |
6.4m (21.0 ft) |
6.86m (22.6 ft) |
| Overall Width |
2.44m (8.0 ft) |
2.44m (8.0 ft) |
| Height Above Frame |
2.0m (8.0 ft) |
2.0m (6.6 ft) |
Capacities |
| Model |
10B |
12B |
| Level Aggregate Capacity |
7.7 cu m ( 10 cu yds) |
9.2 cu m (12 cu yds) |
| Emulsion Capacity |
2632 liters (700 gals) |
3200 liters (850 gals) |
| Water Capacity |
2632 liters (700 gals) |
3200 liters (850 gals) |
| Cement Hopper |
0,34 cu m (12 cu ft) |
0.34 cu m (12 cu ft) |
| Additive Capacity |
570 liters (150 gals) |
570 liters (150 gals) |
| Hydraulics Reservoir |
490 liters (130 gals ) |
490 liters (130 gals) |
|
Features
- Automatic start/stop materials sequencing
- Automatic aggregate finish shutdown sensor
- 3-way Teflon-lined steel valve self-loading system
- Anti-syphon water load system
- Heated emulsion pump (hot water supplied by truck radiator)
- Flow meters for water & additives
- Direct drive jackshaft (no chaindrives)
- Integrated cement hopper with built-in fluffer
- Variable speed cement feed system interlocked to aggregate output
- Pavement fog sprays and joint sprays
- Automatic variable amplitude hydraulic hopper vibrator
- Quick cleaning emulsion basket strainer
- Side debris dump box
Hydraulic System
- 3 independent circuit, variable displacement, pressure & flow
compensated piston-type pumps
Production Rate
- Pugmill output rate 2727-3636 kg/min (3-4 tons/min)
Power
- John Deere water-cooled turbo diesel,82kw @2500 rpm (110hp)
*
- Rexroth hydraulic pumps, variable displacement triple stack, 416 liters/min
(110 gpm)
- Emulsion Pump - jacketed 2" positive displacement, 227 liters/min (60
gpm)
- Water Pump - 454 liters/min (120 gpm)
- Optional additive Pump - stainless steel, 113 liters/min (30gpm)
- Pugmill - double shafted Magna gun-barrel design with 72 removable auger
paddles. Variable mixing speed, 225 RPM standard
Options
- Computerized programmable controller/monitor
- CALTRANS approved material monitoring and automatic shut-off system
- Truck speed control on operator joystick
- Stainless steel additive tank/pump system
- Removable trailer hitch / air to trailer system
- High pressure washer/ reel
- Dual control joysticks for:
- Right and left side spreader box (reverse)
- Emergency shutoff
- Box side shift
- Spreader box lift
- Main control mix start/stop
- Chute diverter (right/left)
- Water spray bar (right/left)
*Alternative
engines available
U.S. and International Patents Pending. VSS reserves the right to make
changes in specifications at any time as part of our continuing program
improvement.
|
For all equipment needs contact:
VSS Macropaver Division
VSS Macropaver
PO Box 178
Hickman, CA 95323
Phone: 209-874-2719 |
Copyright © 2000 Valley
Slurry Seal Co All Rights Reserved.
|
|
