EQUIPMENT: MINIMAC CR-1000®
SLURRY MICROSURFACING MACHINES
Valley Slurry Seal continues to pioneer pavement maintenance equipment solutions by introducing the VSS Minimac CR-1000, the world's only compact slurry/microsurfacing machine with continuous run operation.  Now contractors can have all the great features and benefits of the go-anywhere, highly respected Minimac® and take on larger jobs where continuous-run paving is an advantage or a requirement.
  • Versatility is the key to the compact Minimac CR-1000.  The Minimac CR-1000 is uniquely suited for:
    • Supporting larger, application machines on bigger jobs, such as the VSS Macropaver®.
    • Tackling smaller, continuous-run projects.
    • Operating in confined spaces, in a non-continuous mode, for parking lots, garages, driveways, footpaths, walkways, golf cart paths and other jobs where big machines and large crews aren't feasible or cost effective.
  • The Minimac CR-1000 is even more versatile since it can be driven from either end of the machine thanks to it's dual-drive system.  This allows the driver to be located in the most optimum position for either continuous-run operation in the front or in the back for traditional slurry/microsurfacing.
  • The Minimac CR-100 offers production rates of 1000 kg/minute (1.1 tons.minute) or better.
  • This machine is feature-packed, begining with single, one- or two-man operation - two if in continuous run.  Critical operations are controlled with a single joystick.  Auto-sequencing assures consistent application of all slurry seal and other polymer microsurfacings.  Material is thoroughly mixed automatically by a double shafted pugmill.  It can also deliver material on grades up to 15%.  With a proper material staging, non-continuous operation loading takes as little as five minutes.
SPECIFICATIONS
Dimensions
Total Unit Length 7.92 m26 ft
Overall Width1.83 m6.0 ft
Overall Height2.24 m88 in
Wheelbase3.66 m144 in
Unladen Weight8,165 kg18,000 lbs
Maximum Gross Weight14,515 kg32,000 lbs
Tire Size28 x 12.5 x 1524 ply

Vehicle Information
Drive TrainHydrostatic 4 wheel drive 
Grade Ability15% grade 
Shuttle Ground Speed21 kph13 mph
Turn Radius6.10 m20 ft

Capacities
Aggregate Capacity3 cu m4 cu yd
Emulsion Capacity1,173 liters310 gal
Water Capacity1,173 liters310 gal
Fines Capacity170 liters6 cu ft
Additive Capacity246 liters65 gal
Fuel Tank170 liters45 gal
Hydraulic Reservoirs284 liters75 gal

Performance
Pugmill Output1000 kg/min1.1 ton/min
Features
  • Automatic start/stop materials sequencing
  • Automatic aggregate finish shutdown
  • Integrated cement hopper with built-in fluffer
  • Heated emulsion pump (hot water supplied by radiator)
  • Additive tank/pump system
  • Quick-open Teflon® insert emulsion valves
  • Pavement fog sprays and joint sprays
  • Automatic variable amplitude hydraulic hopper vibrator
  • Rotameter sight flow gauges for water/additive
  • Direct drive jackshaft system
  • Emulsion self-loading
  • Quick cleaning emulsion basket strainer
Power
  • John Deere turbo-charged diesel, 104 kw @ 2400 rpm (140 hp)
  • Rexroth variable displacement hydraulic pumps compensated for pressure and flow rated at a maximum flow rate of 447 liters/min @ 2400 rpm (118 gpm)
  • Emulsion Pump - 2" variable displacement and hot water jacketed with a flow rating of 151 liters/min. @ 290 rpm(40 gpm)
  • Water Pump - 113.5 liters/min. (30 gpm)
  • Additive Pump - stainless steel, 45.4 liters/min (12 gpm)
  • Pugmill - double shafted Magna gun-barrel design with 46 removable auger paddles. Variable mixing speed, 225 rpm standard
Options
  • Computerized programmable controller/monitor
  • Caltrans automatic shut off system
  • High pressure washer/reel
For all equipment needs contact:
VSS Macropaver Division
VSS Macropaver
PO Box 178
Hickman, CA 95323
Phone: 209-874-2719
Copyright © 2000 Valley Slurry Seal Co All Rights Reserved.