Minimac CR-1000

Valley Slurry Seal continues to pioneer pavement maintenance equipment solutions by introducing the VSS Minimac CR-1000, the world's only compact slurry/microsurfacing machine with continuous run operation.  Now contractors can have all the great features and benefits of the go-anywhere, highly respected MinimacĀ® and take on larger jobs where continuous-run paving is an advantage or a requirement.

Versatility is the key to the compact Minimac CR-1000.  The Minimac CR-1000 is uniquely suited for

  • Supporting larger application machines on bigger jobs, such as the VSS Macropaver
  • Tackling smaller, continuous-run projects.
  • Operating in confined spaces, in a non-continuous mode, for parking lots, garages, driveways, footpaths, walkways, golf cart paths and other jobs where big machines and large crews aren't feasible or cost effective.

The Minimac CR-1000 is even more versatile since it can be driven from either end of the machine thanks to it's dual-drive system.  This allows the driver to be located in the most optimum position for either continuous-run operation in the front or in the back for traditional slurry/microsurfacing.

The Minimac CR-1000 offers production rates of 1.5 tonnes/min. (1.65 tons/min.) or better.

This machine is feature-packed, begining with single, one- or two-man operation - two if in continuous run.  Critical operations are controlled with a single joystick.  Auto-sequencing assures consistent application of all slurry seal and other polymer microsurfacings.  Material is thoroughly mixed automatically by a double shafted pugmill.  It can also deliver material on grades up
to 15%.  With a proper material staging, non-continuous operation loading takes as little as five minutes.

Request a quote



Total Unit Length

8.08 m

26.5 ft.

Overall Width

1.83 m

6.0 ft.

Overall Height

2.24 m

88 in.


3.66 m

144 in

Unladen Weight

8,165 kg

18,000 lbs

Maximum Gross Weight

14,515 kg

32,000 lbs

Tire Size

28 x 12.5 x 15

24 ply


Vehicle Information

Drive Train

Hydrostatic 4 wheel drive


Grade Ability

15% grade


Shuttle Ground Speed

21 kph

13 mph

Turn Radius

6.1 m

20 ft



Aggregate Capacity

3 cu. m

4 cu. yd.

Emulsion Capacity

1,173 liters

310 gallons

Water Capacity

1,173 liters

310 gallons

Fines Capacity

170 liters

6.0 cu. ft.

Additive Capacity

246 liters

65 gallons

Fuel Tank

170 liters

45 gallons

Hydraulic Reservoirs

284 liters

75 gallons



Pugmill Output

1.5 tonnes/min.

1.65 tons/min.



  • Automatic start/stop materials sequencing
  • Automatic low aggregate shutdown
  • Integrated cement hopper with built-in fluffer
  • Heated emulsion pump (hot water supplied by radiator)
  • Additive tank/pump system
  • Quick-open Teflon insert emulsion valves
  • Pavement fog sprays and joint sprays
  • Automatic variable amplitude hydraulic hopper vibrator
  • Rotameter sight flow gauges for water/additive
  • Direct drive jackshaft system
  • Emulsion self-loading
  • Quick cleaning emulsion basket strainer


  • John Deere turbo-charged diesel, 104 kw @ 2400 rpm (140 hp)
  • Hydraulic quad pumps variable displacement, pressure and flow compensated, combined 490 liters/min @ 2400 rpm (130 gpm)
  • Emulsion Pump - 2" variable displacement and hot water jacketed with a flow rating of 333 liters/min. (88 gpm)
  • Water Pump - 113 liters/min. (30 gpm)
  • Additive Pump - stainless steel, 45 liters/min. (12 gpm)
  • Pugmill - double shafted Magna gun-barrel design with 46 removable auger paddles. Variable mixing speed, 260 rpm standard


  • Electronic water and additive flowmeters
  • Caltrans approved material monitoring and control system
  • High pressure washer/reel



Mailing Address: PO Box 178
13024 Lake Road Hickman, CA 95323 Map It
Phone: 209-874-2719
Fax: 209-874-1174
US Only - Toll Free: 800-474-2357
Request A Quote