DESCRIPTION:
RoadChem™ 1002® is an additive for high float emulsions for preparing highly stable high float asphalt emulsions.

BENEFITS:

• Creates Highly stable emulsions
• Very High float
• Easily dispersed in water
• High activity
• Emulsifies most asphalts
• Dispersed in water phase

PHYSICAL PROPERTIES:
Appearance: Dark colored liquid.
Flash point: > 150C
Specific gravity: 0.95 g/ml
Storage: Store in a well ventilated cool dry place. Keep dry.
Storage life: 12 months minimum (if stored correctly).
Packaging: Supplied in steel 205 lt size drums, in 1 tonne totes, or in bulk.

APPLICATION:
RoadChem™ 1002® may be used in the production of slow setting or rapid stting asphalt emulsions. In HFRS-1 or HFRS-2 or in HFMS-1 or HFMS-2
RoadChem™ 1002® is a tall oil derivative.

TYPICAL FORMULATION:
All formulations should be tested in the laboratory before use.

HFMS-1
RoadChem™ 1002® 0.5%
RoadChem™ 1001® 0.5%
Sodium hydroxide 0.15%
Adjust pH to 9.0 -10.0
Water: TO 100%
Diesel (added to asphalt) 1-3%
Asphalt: 60%

HFMS-2
RoadChem™ 1002® 0.5%
RoadChem™ 1001® 0.5%
Sodium hydroxide 0.15%
Adjust pH to 9.0 -10.0
Water: to 100%
Diesel (added to asphalt) 1-3%
Asphalt: 65%

HFRS-1
RoadChem™ 100®2 0.3%
RoadChem™ 1001® 0.3%
Sodium Hydroxide 0.2%
Adjust pH to 11.5-12.5
Asphalt 60%
Diesel( added to asphalt) 1-3%
WATER TO 100%

HFRS-2
RoadChem™ 1002® 0.3%
RoadChem™ 100®1 0.3%
Sodium Hydroxide : 0.15%
Adjust to pH 11.0-12.0
Asphalt 65%
Water to 100%

RoadChem™ 1002® gives optimum cement mixing around a pH of 9.0. It must first be dissolved in warm water and pH adjusted using Sodium Hydroxide.

SAFETY:
A Material Safety Data Sheet is available for this product. Always read the safety data sheet for any chemical prior to use.

Valley Slurry Seal Company, PO Box 981330, West Sacramento, CA 95798, USA.
Phone (916) 373-1500 Fax: (916) 373-1438 Email: vss@slurry.com

Information given herein is given in good faith, without warranty, representation or inducement or license of any kind. VSS does not assume any legal responsibility for reliance upon same. VSS is not responsible for materials not manufactured by VSS that may represent a hazard in handling or use, nor for the safety of any process employing any VSS product. No representation is given as to freedom from patent restriction.
Dec 1998