RoadChem™ 406HA® Chip Seal Emulsifier

VSS ASPHALT TECHNOLOGIES DATA SHEET VER: 1.0 --PRODUCT INFORMATION

Back to Specialty Chemicals Page 

DESCRIPTION:
RoadChem™ 406HA® Chip Seal Emulsifier is 100 actives cationic rapid set emulsifier that contains special additives that make it useful for emulsifying difficult asphalts, including those that are parrafinic, low penetration and high in asphaltenes. It will enhance viscosity of most systems by 15-50%. RoadChem™ may also be used for cold mixes, if formulated correctly. The emulsions so made have very high early strength with most aggregates. .

BENEFITS:

  • 100% actives
  • Rapid Set
  • Difficult bitumens may be used
  • Excellent adhesion
  • Good stability
  • High viscosity

PHYSICAL PROPERTIES:
Appearance: Liquid (>10CC)
Flash point: > 339F (> 170C)
Specific gravity: 0.86@ 78F (25C)
Viscosity: 6-8 cSt @ 140F (60C)
Storage: Store in a cool dry place, do not let the temperature exceed 120F (50C). Use open drums first.
Storage life: 12 months minimum (if stored correctly).
Packaging: Supplied in steel 205 lt size drums, in 1 tonne totes, or in bulk.

APPLICATION:
RoadChem™ 406HA® is an emulsifier of the fatty diamine type. RoadChem™ 406HA® is designed for use in CRS-1, CRS-2 and high binder content emulsions. It may also be used for mixing grade emulsions.

TYPICAL FORMULATION:
All formulations should be tested in the laboratory before use.

 

Rapid Set:
Soap Solution:
RoadChem™ 406HA®: 0.1-0.25%
Calcium Chloride: 0.1%
Hydrochloric to pH: 1.8-2.8
Kerosene: 0-2%
Water: Adjust to 100%
Asphalt: 60-70%

Mixing Grade:
Soap Solution:
RoadChem™ 406HA®: 0.3-0.7%
Calcium Chloride: 0.1%

SAFETY:
A Material Safety Data Sheet is available for this product. Always read the safety data sheet for any chemical prior to use.

Valley Slurry Seal Company, PO Box 981330, West Sacramento, CA 95798, USA.
Phone (916) 373-1500 Fax: (916) 373-1438 Email: vss@slurry.com

Information given herein is given in good faith, without warranty, representation or inducement or license of any kind. VSS does not assume any legal responsibility for reliance upon same. VSS is not responsible for materials not manufactured by VSS that may represent a hazard in handling or use, nor for the safety of any process employing any VSS product. No representation is given as to freedom from patent restriction.

Back to Specialty Chemicals Page

Copyright © 2005 Valley Slurry Seal Co All Rights Reserved.