BENEFITS:

PHYSICAL PROPERTIES:
Appearance: Milky white liquid
Solids: 69% -71%
Specific gravity: 0.98 @ 78F (25C)
Styrene content: Bound styrene 24%,
Residual Monomer: 0.09% max
Glass transition ( DSC): -58C
Storage life: 12 months minimum (if stored correctly).
Packaging: Supplied in drums (200 kg) or in bulk.

APPLICATION:
RoadChem™ 615® may be post added to any emulsion but co milling by injection into the soap line prior to the mill. Must be pumped with a diaphragm, cavity or air pump to reduce shearing.

RoadChem™ 615® is a anioinic Styrene Butadiene Rubber latex. The latex contains 24% - 26% bound styrene.

RoadChem™ 615® may be used in road applications or in industeial applications requiring flexibility and good low and high temperature properties.

PERFORMANCE:
Typical effect on bitumen(100pen)

• Low temperature modulus reduced by up to 30%.
• Ductility increased up to 800%.
• Extension to break : 2000%.
• When used in concentrations as low as 2% may meet most specifications.

SAFETY:
A Material Safety Data Sheet is available for this product. Always read the safety data sheet for any chemical prior to use.

Valley Slurry Seal Company, PO Box 981330, West Sacramento, CA 95798, USA.
Phone (916) 373-1500 Fax: (916) 373-1438 Email: vss@slurry.com

Information given herein is given in good faith, without warranty, representation or inducement or license of any kind. VSS does not assume any legal responsibility for reliance upon same. VSS is not responsible for materials not manufactured by VSS that may represent a hazard in handling or use, nor for the safety of any process employing any VSS product. No representation is given as to freedom from patent restriction.