RoadChem™ AS 1® Antistripping Agent

RoadChem™ AS 1® Antistripping Agent

VSS ASPHALT TECHNOLOGIES DATA SHEET VER: 1.0 --PRODUCT INFORMATION

Back to Specialty Chemicals Page

DESCRIPTION:
RoadChem™ AS 1® is a highly stable antistripping agent for increasing adhesion between asphalt and aggregates. It has been specifically designed for use in the manufacture of high performance Hot Mix. It may be used in polymer asphalt systems.

BENEFITS:

Heat Stable
Easy to use
Liquid
Compatible with a wide range of bitumens and polymers

PHYSICAL PROPERTIES:
Appearance: Dark brown viscous liquid
Flash point: 370F(190C)
Pour Point: 12C
Specific gravity: 1.44 @ 77F (25C)
Viscosity:1000cps@77F(25C)
Storage: Store in a cool dry place, do not let the temperature exceed 120F (50C). Use open drums first.
Storage life: 12 months minimum (if stored correctly)
Packaging: Supplied in steel 205 lt size drums, in 1 tonne totes, or in bulk.

APPLICATION:
RoadChem™ AS 1® is an derivative of polyamines and fatty acids.
For best results RoadChem™ AS 1® should be added to the asphalt and blended by circulation for 30 minutes before use.

TYPICAL FORMULATION:
All formulations should be tested in the laboratory before use.
0.7 % AS 1® in asphalt.

SAFETY:
Material Safety Data Sheet is available for this product. Always read the safety data sheet for any chemical prior to use.

Valley Slurry Seal Company, PO Box 981330, West Sacramento, CA 95798, USA.
Phone (916) 373-1500 Fax: (916) 373-1438 Email: vss@slurry.com

Information given herein is given in good faith, without warranty, representation or inducement or license of any kind. VSS does not assume any legal responsibility for reliance upon same. VSS is not responsible for materials not manufactured by VSS that may represent a hazard in handling or use, nor for the safety of any process employing any VSS product. No representation is given as to freedom from patent restriction.

RK/August 5, 1998